1. Cobra CM2204/2300kV
Cobra CM2204/2300kV
Cobra CM2204/2300kV

Cobra CM2204/2300kV

0 Review(s) Write a Review
Your Price: $17.99
Cobra CM2204/2300kV Brushless Multirotor Motor
Part Number: 1001017
Availability: Out of Stock.

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a cross mount built right into the back plate for easy installation on your model.

Cobra 2204/28 Motor Specifications:
Stator Diameter: 22.0 mm (0.866 in)
Stator Thickness: 4.0 mm (0.157 in)
Number of Stator Slots: 12
Number of Magnet Poles: 14
Motor Wind: 28 Turn Delta
Motor Kv Value: 2300 RPM per Volt
No Load Current: (Io) 0.66 Amps @ 8 Volts
Motor Resistance: (Rm) per Phase 0.126 Ohms
Motor Resistance: (Rm) Phase to Phase 0.084 Ohms
Maximum Continuous Current: 15 Amps
Max Continuous Power :(2-cell Li-Po) 125 Watts
Max Continuous Power: (3-cell Li-Po) 180 Watts
Motor Weight: 24.6 grams (0.87 oz.)
Outside Diameter: 27.0 mm (1.063 in.)
Shaft Diameter: 3.00 mm (0.118 in.)
Motor Body Length: 14.2 mm (0.559 in.)
Overall Shaft Length: 32.5 mm (1.145 in.)
Motor Timing: 5-10 degrees
PWM Frequency: 8 KHz